802.11AX Enterprise-grade Managed AP WIFI 6
2.4GHz + 5GHz
Highlight Features :
2.5 Gbps SFP Port, Multi-Gigabit Mesh Networking
Next-generation AX3000 chip, supporting 160 MHz 2975 Mbps
Next-generation Wi-Fi 6 technology, higher concurrency, lower latency
Unified cloud management, intelligent tuning, easy O&M
Wireless Protocols : 802.11a/b/g/n/ac/ax
Data Rate :
Combined peak data rate:
2.4 GHz + 5 GHz, 2.976 Gbps
Fixed Service Port :
1 x 10/100/1000Base-T Ethernet port
1 x 2.5GE combo port
Input Power Supply :
48 V DC/0.6 A power supply
PoE (802.3af)
External Power Supply : No
IP Rating : N/A
Mounting : Wall/Ceiling mounting
Radio Design :
Dual-radio: 2.4 GHz (2x2), 5 GHz (2x2)
up to 4 spatial streams
Antenna Type : Built-in omnidirectional antenna
Bluetooth : Bluetooth 5.1
Max. Power Consumption : 12.95 W
Operating Temperature : –10°C to +50°C (14°F to +122°F)
Dimensions (W x D x H) :
220 mm x 220 mm x 49 mm
(8.66 in. x 8.66 in. x 1.93 in.)
In Box :
1x RUIJIE RG-AP820-L V3 Indoor Wireless Access Point
1x Bracket
4x Screw & Fisher
1x Manual Book
* TIDAK TERMASUK POE ADAPTER
COMPATIBLE :
RG-E-130(GE)
Wi-Fi Radio | RG-AP820-L(V3) |
Radio design | Dual-radio and up to four spatial streams: - Radio 1: 2.4 GHz, two spatial streams, 2x2 MU-MIMO - Radio 2: 5 GHz, two spatial streams, 2x2 MU-MIMO |
Operating frequencies | Radio 1, 802.11b/g/n/ax: - 2.400 GHz to 2.4835 GHz, ISM Radio 2, 802.11a/n/ac/ax: - 5.150 GHz to 5.250 GHz, U-NII-1 - 5.250 GHz to 5.350 GHz, U-NII-2A - 5.470 GHz to 5.725 GHz, U-NII-2C - 5.725 GHz to 5.850 GHz, U-NII-3/ISM Note: Available frequency bands may vary with countries or regions. To use the above-mentioned frequency bands, ensure that they are supported in your country or region. |
Data rates | Combined peak data rate: 2.976 Gbps 2.4 GHz radio - Two spatial stream Single User (SU) MIMO for up to 574 Mbps wireless data rate to individual 2SS HE40 802.11ax client devices (maximum) - Two spatial stream Single User (SU) MIMO for up to 287 Mbps wireless data rate to individual 2SS HE20 802.11ax client devices (typical) 5 GHz radio - Two spatial stream Single User (SU) MIMO for up to 2.402 Gbps wireless data rate to individual 2SS HE160 802.11ax client devices (maximum) - Two spatial stream Single User (SU) MIMO for up to 1.201 Gbps wireless data rate to individual 2SS HE80 802.11ax client devices (typical) |
Data rate set | The following 802.11-compliant data rates in Mbps are supported: 2.4 GHz radio - 802.11b: 1, 2, 5.5, 11 - 802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 - 802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40) - 802.11ax: 8.6 to 574 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40) 5 GHz radio - 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 - 802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40) - 802.11ac: 6.5 to 1,732 (MCS0 to MCS9, NSS = 1 to 4, VHT20 to VHT160) - 802.11ax: 8.6 to 2,402 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE160) |
Packet aggregation | 802.11n/ac/ax: A-MPDU and A-MSDU |
Antenna type | Built-in omnidirectional antennas (two 2.4 GHz antennas and two 5 GHz antennas) |
Antenna gain | 2.4 GHz: 5 dBi 5 GHz: 5 dBi |
Maximum transmit power | 2.4 GHz radio: 26 dBm (23 dBm per chain) 5 GHz radio: 26 dBm (23 dBm per chain) Note: The transmit power is limited by local regulatory requirements. For details, see WLAN Country or Region Codes and Channel Compliance.
Thailand 2.400 GHz to 2.4835 GHz, EIRP ≤ 20 dBm 5.150 GHz to 5.350 GHz, EIRP ≤ 23 dBm 5.470 GHz to 5.725 GHz, EIRP ≤ 30 dBm 5.725 GHz to 5.825 GHz, EIRP ≤ 30 dBm |
Power increment | Configurable in increments of 1 dBm |
Radio technologies | 802.11b: Direct-Sequence Spread-Spectrum (DSSS) 802.11a/g/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM) 802.11ax: Orthogonal Frequency Division Multiple Access (OFDMA) |
Modulation types | 802.11b: BPSK, QPSK, CCK 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM 802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM |